ZenPack:Juniper Devices

From Zenoss Wiki
This is the approved revision of this page, as well as being the most recent.
Jump to: navigation, search

Note: This ZenPack is available in commercial versions of Zenoss. Click here to request more information about this commercial ZenPack. Click here to see all commercial ZenPacks.

Zenoss, Inc.
ZenPack name

Devices Monitored:

Juniper Devices ZenPack

The JuniperMonitor ZenPack allows system administrators to monitor their Juniper devices.


The ZenPack Catalog has moved to its new home at https://www.zenoss.com/product/zenpacks as of January 17, 2017. The following information may be out of date, and this page will eventually be removed.


This ZenPack is included with commercial versions of Zenoss and enterprise support for this ZenPack is provided to Zenoss customers with an active subscription.


Version 2.1.1- Download
Released on 2014/03/05
Compatible with Zenoss Resource Manager 4.1.x, Zenoss Resource Manager 4.2.x, Zenoss Resource Manager 5.x.x


The ZenPacks.zenoss.JuniperMonitor ZenPack monitors devices from Juniper Networks.


Prerequisite Restriction
Product Zenoss platform 4.x, Zenoss 2.2 or higher
Required ZenPacks ZenPacks.zenoss.JuniperMonitor

Configuring Juniper Devices to Allow SNMP Queries

Configure the Juniper device to allow SNMP queries from the Zenoss platform server, and send SNMP v1 or SNMP v2 traps to the Zenoss platform server.

Configuring Zenoss platform

All Juniper devices must exist under the /Devices/Network/Juniper device class.

  1. Navigate to the device or device class in the Zenoss platform interface.
    • If applying changes to a device class:
      1. Select the class in the devices hierarchy.
      2. Click Details.
      3. Select Configuration Properties.
    • If applying changes to a device:
      1. Click the device in the device list.
      2. Select Configuration Properties.
  2. Edit the appropriate configuration properties for the device or devices.
    Juniper Configuration Properties
    Name Description
    zSnmpCommunity Consult with your network administrators to determine the SNMP community permitted.
    zSnmpMonitorIgnore Set to a value of False.
    zSnmpPort Set the SNMP port. The default port is 161.
    zSnmpVer Set the SNMP version. Set to a value of v2c.

  3. Click Save to save your changes. You will now be able to start collecting the Juniper device metrics from this device.
  4. Navigate to Graphs and you should see some place holders for graphs. After approximately fifteen minutes you should see the graphs start to become populated with information.


Type Name
Modeler zenmodeler
Performance Collector zenperfsnmp


Normal Installation (packaged egg)

  1. Download the appropriate egg file for the version of Zenoss you are running.
  2. Ensure you are logged in as the zenoss user:
    $ sudo su - zenoss
  3. Install the ZenPack:
    $ zenpack --install ZenPacks.zenoss.JuniperMonitor-*.egg
  4. Restart these services:
    $ zenoss restart


Purplemarker.png New: Don't forget to add yourself to the Zenoss User Map!

blog comments powered by Disqus