ZenPack:VMware ESX Server Monitor

From Zenoss Wiki
This is the approved revision of this page; it is not the most recent. View the most recent revision.
Jump to: navigation, search

Note: This is a Core ZenPack which can be found in the Core Zenoss RPM, and is fully documented in the Zenoss Extended Monitoring Guide. If you did not install this pack when you installed Zenoss Core, it can be found in $ZENHOME/packs.

Organization
Zenoss, Inc.
ZenPack name
ZenPacks.zenoss.EsxTop
Link to more docs
View Documentation


Applications Monitored: 



VMware ESX Server Monitor ZenPack

The VMWare ESX Server ZenPack for Core allows you to monitor ESX hosts and guests via VMWares EsxTop utility. The ZenPack uses the resxtop command to gather performance information about VMware Infrastructure™ ESX™ servers.

Warning

The ZenPack Catalog has moved to its new home at https://www.zenoss.com/product/zenpacks as of January 17, 2017. The following information may be out of date, and this page will eventually be removed.

Support

This ZenPack is part of Zenoss Core. Open Source users receive community support for this ZenPack via our online forums. Enterprise support for this ZenPack is provided to Zenoss customers with an active subscription.

Background

This ZenPack uses the VMware resxtop command to gather performance information about VMware ESX servers. NOTE: This ZenPack is deprecated; use ZenPacks.zenoss.vSphere instead.


This ZenPack can be used alone, or with one of the other VMware ZenPacks. When used alone, a basic modeler creates virtual machines under the /Devices/Server/Virtual Hosts/EsxTop device class for any host device that is added and modeled. Otherwise, performance data can be collected for the ESX hosts modeled by the other ZenPacks.


Prerequisites

Prerequisite Restriction
Product Zenoss platform 4.x
Required ZenPacks ZenPacks.zenoss.ZenossVirtualHostMonitor v2.3.5

ZenPacks.zenoss.EsxTop

Required Software (on collectors) OpenSSL development package v0.9.7

VMware vSphere CLI v4.1


Installing Prerequisite Libraries

The VMware vSphere CLI is required for access to the resxtop command, which enables Zenoss platform to model and gather performance information about individual ESX servers.

Follow these steps to install the CLI and required software:


  1. If you have not yet installed it, install the OpenSSL development package. For example, for an RPM-based system, enter:
    yum install openssl-devel
  2. From your VMware account, download the VMware vSphere CLI. Note: For downloads and documentation, go to: http://downloads.vmware.com/d/details/vcli41/ZHcqYmRoaCpiZHRAag==
  3. Copy the package to each Zenoss platform collector.
  4. For each collector:
    1. Expand the package file.
    2. Run the following command to install the package:
      ./vmware-install.pl
    3. As the zenoss user, run the following command to verify successful installation:
      resxtop --server myESXServer --user userOnRemoteEsxServerAllowedToUseEsxTop -b -n 1 -a

      The resxtop command prompts for a password.

    4. Enter the password for a user with permissions on the remote ESX server. If the command is working correctly, then a screen displays with several pages of command output.
    5. Create a symbolic link from the location that the resxtop command was installed into the $ZENHOME/libexec directory. This allows the check_esxtop command to automatically determine which binary to run. For example:
      cd $ZENHOME/libexec
      ln -s PathToResxtop
    6. Test the check_esxtop command by showing the VMs on the remote server:
      $ZENHOME/ZenPacks/Ze*EsxTop*/Z*/z*/E*/libexec/check_esxtop --server=myEsxserver \
       --user=userOnRemoteEsxServerAllowedToUseEsxTop --password=password --showvms


Enabling the ZenPack

Follow these steps to enable this ZenPack. From the Zenoss platform interface, add a host:


  1. From Infrastructure > Devices, navigate to the /Devices/Server/Virtual Hosts/EsxTop device class.
  2. From the Add Device menu, select Add a Single Device. The Add a Single Device dialog appears.
  3. Enter a host name or IP address.
  4. De-select the Model Device option.
  5. Click Add.
  6. Select the newly added device in the list. The device overview appears.
  7. Click Details, and then select Configuration Properties in the left panel.
  8. Enter login credentials for the zCommandUsername and zCommandPassword configuration properties, and then click Save.
  9. If the device has an SNMP agent installed, update the ESX device configuration with the appropriate SNMP configuration information, and then add any desired modeler plugins.
  10. From the Action menu, select Model device.


Daemons

Type Name
Modeler zenmodeler
Performance Collector zencommand

Installation

Normal Installation (packaged egg)

  1. Download the appropriate egg file for the version of Zenoss you are running.
  2. Ensure you are logged in as the zenoss user:
    $ sudo su - zenoss
  3. Install the ZenPack:
    $ zenpack --install ZenPacks.zenoss.EsxTop-*.egg
  4. Restart these services:
    $ zenoss restart

Developer Mode Installation

In order to do a development mode installation you will want to clone the existing git repository, and then use the --link flag with the zenpack command:

  1. Ensure you are logged in as the zenoss user:
    $ sudo su - zenoss
  2. Start by cloning the upstream repository:
    $ git clone git://github.com/path/to/repo
  3. Next, perform the installation:
    $ zenpack --link --install ZenPacks.zenoss.EsxTop
  4. Finally, restart these serivices:
    $ zenoss restart

Discuss

Purplemarker.png New: Don't forget to add yourself to the Zenoss User Map!

blog comments powered by Disqus