Difference between revisions of "ZenPack:NetApp Monitor"
|Line 82:||Line 82:|
* Zenoss >= 4.1.1
* Zenoss >= 4.1.1
=== Configuration ===
=== Configuration ===
Revision as of 19:07, 9 April 2013
- Zenoss, Inc.
- ZenPack name
- NetApp (ONTAP 8, ONTAP 9)
NetApp Monitor ZenPack
The ZenPack Catalog has moved to its new home at https://www.zenoss.com/product/zenpacks as of January 17, 2017. The following information may be out of date, and this page will eventually be removed.
This ZenPack is included with commercial versions of Zenoss and enterprise support for this ZenPack is provided to Zenoss customers with an active subscription.
NetAppMonitor provides additional modeling and monitoring for NetApp devices. NFS, CIFS and HTTP operations per second are collected, as well as file system and snapshot utilization information. Hardware model and operating system revision asset information is modeled.
The NetApp ZenPack uses reports provided by the StorageBase ZenPack.
The features added by this ZenPack can be summarized as follows. They are each detailed further below.
- Native NetApp ZAPI protocols or SNMP protocols
- Monitoring of Peformance Component Metrics
- Optional service impact with addition of Zenoss Service Dynamic Product.
Place a device in the '/Storage/NetApp/7-Mode' or '/Storage/NetApp/C-Mode' Device classes to enable Native NetApp ZAPI based monitoring of the NetApp Appliance. Placing a device in the '/Storage/NetApp/SNMP' Device class will enable legacy snmp monitoring of the NetApp Appliance.
- Asset information
- Hardware Model
- Operating System Revision
- Device metrics
- Network bits/sec: Send and Received
- Operations/sec: NFS, CIFS and HTTP
- File system metrics
- File system utilization (90% threshold)
- Snapshot utilization (120% threshold)
- 7-Mode and C-Mode Zapi monitoring will model
- IO metrics; busy metrics; transfers
- Capacity; extensible by the user.
- Latency; Data and Ops
- Lun Clients
- Capacity of files and filesystems,
- Inode and Space used metrics
- Raid Groups
- Network in/out/errors
- Disk Shelves
- cifs/nfs/internal ops
- System Nodes
- uptime,busytime and failed fan counts.
- NetApp uses SSH to model NFS clients of file systems. It uses SNMP to model
- storage enclosures
- RAID groups
- LUN clients
- Zenoss >= 4.1.1
- ZenPacks.zenoss.PythonCollector >= 1.0.1
zCommandUser zCommandPassword zNetAppSSL (true = enabled)
configure the snmp settings to match the NetApp Filer configure zCommandUser/zCommandPass for ssh access to gather NFS Client information
- Events (all versions)
configure v1 or v2 traps to be sent to Zenoss Resource Monitor forward syslog events by logging into the NetApp Device, configure syslog, add the following *.* @yourzenossserver
replace yourzenossserver with the ip or dns entry of your zenoss server
- zenmodeler (modeling)
- zenpython (zapi performance metrics)
- zenperfsnmp (legacy snmp performance metrics)
- zencommand (legacy command based performance metrics)
Collecting Additional ZAPI Performance metrics
Most components are collecting performance metrics from the perf subsection of the zapi api calls. When modelling we collect the base uuid and store the information as a set of component xpath entries. In most cases we need to just add a new datapoint to the existing datasource, and then add the appropriate xpath fragment to retrieve the appropriate data.
Samples of the xpath strings can be found in ZenPacks.zenoss.NetAppMonitor/yaml/Cmode
Be cautious when enabling new metrics as large numbers of components can significantly increase the number of monitored datapoints being collected.
Normal Installation (packaged egg)
- Download the appropriate egg file for the version of Zenoss you are running.
- Ensure you are logged in as the zenoss user:
$ sudo su - zenoss
- Install the ZenPack:
$ zenpack --install ZenPacks.zenoss.NetAppMonitor-*.egg
- Restart these services:
$ zenoss restart
New: Don't forget to add yourself to the Zenoss User Map!blog comments powered by Disqus